The Ice Lock is a devious bondage device that’s a true mindfuck – there’s no getting out until the ice melts enough to release the plunger and set you free.
Available in two sizes. The smaller size will “unlock” in 15 – 45 minutes while the larger size can take up to 2 ½ hours based on the room condition.

Attach one end to a stationary point (such as a headboard, post, “D” ring in the floor, or an overhead chain hoist) and then attach the other end to the restraints your boy is wearing. Just sit back and watch him struggle because there’s no getting out until all that ice melts!

These locks are also perfect for self-bondage scenes.

Bonus! The Neoprene Sleeve is a 3 mm insulator and can be used to ADD time to the melting process (~30 min).

Please be aware that water will leak out as the Ice Lock melts. Use a towel or clear the area to keep the area dry.

Time varies depending on room temperature, tugging, pulling, and how much water is used.

Dimensions:
Small: 2 inch ~ 51 mm
Large: 4 inch ~ 102 mm

An original Mr. S Leather design.

Instructions for Use

These Ice Locks are fairly simple mechanical devices but a few instructions will help you understand how to best set them up:

  1. Remove the metal plunger from the larger cylinder and fill cylinder with cold tap water.
  2. Re-insert the metal plunger. Holding the plunger “O” ring, push in-and-out 4-5 times until no more water is pushed out of the small side-hole (If there is too much water in the chamber, it will push the plunger out when it freezes).
  3. Place the cylinder on top of the included plastic ring on a flat surface in the freezer. You can also place the lock inside of a coffee mug.

Freezing time varies depending on your refrigerator. If the lock plunger is forced out during freezing, melt under hot water and try again.